Dremel slipestein av silisiumkarbid

This Dremel silicon carbide grinding stone works great on many surfaces and is especially helpful when etching glass. As its aluminum oxide counterpart, it offers tougher bits that work well on harder materials like glass. In addition to working well on such items as stone, ceramics, porcelain and nonferrous metals it comes equipped with a 1/8″ shank and boasts its signature blue/green hue.

Industrial abrasive

The Dremel silicon carbide grinding stone accessory bit works wonders on various surfaces. You can use it to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Furthermore, its small cone shape makes it simple and comfortable for users – just pop it right into any standard Dremel rotary tool and back it out slightly for optimal use! To ensure proper fitting, insert it all the way into the tool before slightly backing out to make sure that enough shank is left for collet or chuck collet or chuck grip.

Are you in search of an industrial abrasive designed for general-purpose grinding on metals, castings, welded joints and rivets? Look no further than the Dremel 85622 silicon carbide grinding stone! Made of premium materials that work effectively on both flat and conic surfaces alike – making it the ideal addition to any rotary tool kit!

Cone shaped

The Dremel silicon carbide grinding stone is cone shaped and ideal for use on various surfaces such as stone, glass, ceramics and porcelain – as well as non-ferrous metals like non-ferrous alloys like aluminium. You can use it to remove stilt marks from glass pieces, smooth rough edges on them or as an alternative to using diamond engraving bits when etching glass pieces. In addition, its smaller #84922 accessory can also be used sharpen tools, deburr metal castings smooth welded joints smooth welded joints remove rivets as it runs at speeds up to 35,000 RPMs while fitting into standard collet or chucks on rotary tools which makes using them mobile with ease! You will earn Tool Nut points with every purchase!

This product qualifies for free domestic shipping within the USA.

Works well on a variety of surfaces

The Dremel multi-tool is an adaptable device, offering multiple uses from shaping bathroom tiles to sharpening hedge shears for spring. When it comes to using the Dremel for grinding and sharpening purposes, there are various tips you should keep in mind for using its accessories effectively.

Safety glasses and dust masks should always be worn when working with metals like steel, as sparks and dust particles are prevalent and could potentially enter your eyes, ears and lungs. In addition, gloves and face shields can protect both hands, as well as using multi-vise attachment to maintain secure work environments.

Before using any accessory, be sure to carefully read its product manual. While this may seem obvious, understanding what each accessory can do and applying sufficient pressure are both key aspects. Furthermore, these manuals often detail which materials the accessory works best on as well as recommended speeds; speed can greatly affect both finish quality and how long a surface can remain under work.

Dremel accessories are generally designed to handle higher speeds, though you should always read through and follow the product manual to be sure. Some are rated at 35,000 RPM while others can go up to 20,000. If you’re new to using rotary tools, start slowly increasing speed settings as your experience grows.

While Dremel’s orange aluminium oxide grinding and deburring stone is effective at removing stilt marks on ceramics and engraving glass, its green silicon carbide stones excel in dealing with tougher surfaces like masonry and nonferrous metals – providing an alternative to diamond engraving bits.

Important to keep in mind is that green stones require a lighter touch than aluminium oxide ones. Carbide burrs may break off, necessitating great care when working inside holes with these pieces. Insert the bit all the way in, back it out slightly before tightening down to ensure there is sufficient shank space for the chuck or collet to grip onto it securely.

Easy to use

Grinding and sharpening are crucial skills, whether it be shaping bathroom tiles to fit, deburring metal castings or resharpening garden shears. By taking advantage of tips and accessories provided with your Dremel multi-tool for grinding and sharpening tasks, these jobs become easy and safe. Beginners as well as experts alike can enjoy amazing results using its sharpening options!

Proper hand positioning when using a grinder is crucial for smooth results and decreased stress on your hands. For one-handed grips, hold it with your dominant hand such that its thumb overlaps your weaker thumb; both thumbs should point toward the shaft of the tool.

An often-made mistake when operating a Dremel grinder is to exceed its recommended speed settings and run it at too high a speed, leading to its accessory ‘bumping’ against surfaces, creating unevenness or dents on them. Therefore, it is crucial that users adhere to recommended settings on both their Dremel tool and accessories.

Wearing safety glasses, gloves and a dust mask when using the Dremel is also wise, since sparks and particles from working can often fly off of stone surfaces during use – dust masks will protect both lungs and eyes from such dangers; additionally protective shields will shield eyes from sparks which could fly off.

nb_NONorwegian
Skroll til toppen